GST on Metal Scrap Under RCM 2025: New 2% TDS Rule for MSME Buyers

GST on Metal Scrap Under RCM 2025: New 2% TDS Rule for MSME Buyers

GST on Metal Scrap Under RCM 2025: New 2% TDS Rule for MSME Buyers

Published by: CleverCoins | GST & Tax Compliance

The Indian metal scrap industry plays a crucial role in supporting manufacturing, infrastructure, automobile production, construction, steel processing and recycling businesses. Thousands of small and medium-sized enterprises (MSMEs), scrap dealers, manufacturers, wholesalers and traders participate in this industry every day.

However, managing GST compliance in the metal scrap business has become more important following the introduction of new provisions by the Central Board of Indirect Taxes and Customs (CBIC), effective from 10 October 2024.

Two important changes have attracted considerable attention from businesses operating in the metal scrap industry:

  1. The introduction of a 2% Tax Deducted at Source (TDS) requirement under GST for specified metal scrap transactions between registered persons.
  2. The introduction of Reverse Charge Mechanism (RCM) on metal scrap supplied by unregistered persons to registered buyers.

These provisions were introduced following the recommendations of the 54th GST Council meeting and aim to improve transparency, strengthen tax compliance and create better tracking of transactions in the metal scrap sector.

For MSME buyers, manufacturers and registered scrap dealers, understanding these provisions is essential. Incorrect GST treatment, failure to deduct TDS, non-payment of RCM liability or improper reporting can create financial and compliance complications.

In this detailed guide, we will explain everything businesses need to know about GST on metal scrap under RCM, the 2% GST TDS rule, applicable HSN chapters, registration requirements, calculation examples, GST returns, input tax credit and practical compliance procedures.

1. What Is the New GST Rule for Metal Scrap?

The Government of India introduced significant changes to GST compliance for metal scrap transactions through three important notifications issued in October 2024.

These notifications established a framework covering both registered and unregistered metal scrap suppliers.

The relevant notifications are:

  • Notification No. 24/2024 – Central Tax, dated 9 October 2024.
  • Notification No. 25/2024 – Central Tax, dated 9 October 2024.
  • Notification No. 06/2024 – Central Tax (Rate), dated 8 October 2024.

The provisions became effective from 10 October 2024.

The objective was to improve the monitoring of metal scrap transactions and reduce opportunities for tax evasion through unrecorded purchases and sales.

Understanding the two major provisions

A. GST TDS at 2%

When a registered person purchases specified metal scrap from another registered person, the buyer is required to deduct GST TDS at 2%, subject to the applicable threshold and other conditions.

B. GST under Reverse Charge Mechanism

When a registered person purchases specified metal scrap from an unregistered supplier, the registered buyer is responsible for paying GST under RCM.

This distinction is extremely important.

The 2% TDS mechanism applies to qualifying registered-to-registered transactions, whereas RCM applies to qualifying unregistered-to-registered transactions.

Businesses should therefore identify the GST registration status of their suppliers before determining the applicable tax treatment.

2. What Is the 2% GST TDS Rule on Metal Scrap?

GST TDS means Tax Deducted at Source under Section 51 of the Central Goods and Services Tax Act, 2017.

Under this mechanism, a specified recipient deducts a prescribed percentage of tax from the payment made to the supplier and deposits the deducted amount with the Government.

The Government extended the application of this mechanism to registered persons purchasing specified metal scrap from other registered persons through Notification No. 25/2024 – Central Tax.

Previously, GST TDS was primarily associated with specified government departments, local authorities, governmental agencies and other notified entities.

The amendment brought qualifying registered metal scrap buyers within the GST TDS framework.

Important features of the 2% TDS rule

The important features include:

  • Applicable to specified metal scrap covered under Chapters 72 to 81.
  • Applicable to qualifying transactions between registered suppliers and registered buyers.
  • GST TDS rate is 2%.
  • The applicable threshold is a taxable contract value exceeding ₹2,50,000.
  • TDS is calculated on the taxable value, excluding GST.
  • The buyer must deposit the deducted amount with the Government.
  • The buyer must file the applicable GSTR-7 return.
  • The supplier can claim the eligible TDS credit reflected in the GST system.

The applicable 2% is generally divided as follows:

Transaction typeTDS rate
Intra-state supply1% CGST + 1% SGST
Inter-state supply2% IGST
Total2%

The appropriate tax component depends on the nature and place of supply.

Example of GST TDS calculation

Suppose ABC Steel Manufacturing Private Limited purchases iron scrap from XYZ Metal Traders.

The transaction details are:

  • Taxable value of scrap: ₹5,00,000
  • GST rate assumed for illustration: 18%
  • GST amount: ₹90,000
  • Total invoice value: ₹5,90,000

The GST TDS calculation will be:

2% × ₹5,00,000 = ₹10,000.

The buyer will deduct ₹10,000 as GST TDS.

The supplier will receive the remaining amount after the deduction, subject to the agreed payment terms.

ParticularsAmount
Taxable value₹5,00,000
GST @ 18%₹90,000
Total invoice value₹5,90,000
GST TDS @ 2%₹10,000
Illustrative balance payable₹5,80,000

The ₹10,000 deducted is not an additional GST charge on the transaction. It represents a deduction from the supplier’s payment and is deposited as tax deducted at source.

The supplier can claim the eligible credit through the GST electronic cash ledger after the applicable reporting and system-credit requirements are satisfied.

Important: The example assumes the entire taxable contract value is subject to TDS and that no other adjustment changes the calculation.

3. Which Metal Scrap Is Covered Under the New GST Rules?

One of the most important aspects of the new GST provisions is identifying whether the goods qualify as metal scrap under the relevant tariff classification.

The notifications specifically cover metal scrap falling under Chapters 72 to 81 of the First Schedule to the Customs Tariff Act, 1975.

These chapters broadly cover iron, steel and various non-ferrous metals.

Important HSN chapters

HSN ChapterDescription
Chapter 72Iron and steel
Chapter 73Articles of iron or steel
Chapter 74Copper and copper articles
Chapter 75Nickel and nickel articles
Chapter 76Aluminium and aluminium articles
Chapter 77Reserved for future use
Chapter 78Lead and lead articles
Chapter 79Zinc and zinc articles
Chapter 80Tin and tin articles
Chapter 81Other base metals and related articles

Some commonly encountered scrap classifications include:

  • HSN 7204: Ferrous waste and scrap.
  • HSN 7404: Copper waste and scrap.
  • HSN 7503: Nickel waste and scrap.
  • HSN 7602: Aluminium waste and scrap.
  • HSN 7802: Lead waste and scrap.
  • HSN 7902: Zinc waste and scrap.
  • HSN 8002: Tin waste and scrap.

Businesses must not rely only on the commercial name of a product.

For example, a material described as aluminium scrap in a purchase agreement must be correctly classified based on its actual nature, composition and applicable tariff rules.

Similarly, not every item manufactured from metal automatically qualifies as metal scrap.

Correct HSN classification is essential because it determines whether the transaction falls within the scope of the special TDS and RCM provisions.

4. What Is Reverse Charge Mechanism (RCM) on Metal Scrap?

Reverse Charge Mechanism is a GST system under which the responsibility to pay GST shifts from the supplier to the recipient of goods or services.

Under the normal GST mechanism, the supplier collects GST from the buyer and deposits it with the Government.

Under RCM, the recipient directly pays the applicable GST to the Government.

The Government introduced RCM on specified metal scrap supplies through Notification No. 06/2024 – Central Tax (Rate).

This notification amended the earlier reverse charge notification under Section 9(3) of the CGST Act.

When does RCM apply?

RCM applies when the following conditions are satisfied:

  1. The goods qualify as metal scrap covered under Chapters 72 to 81.
  2. The supplier is an unregistered person under GST.
  3. The recipient is a registered person under GST.
  4. The supply falls within the notified category and the relevant territorial GST provisions.

In these circumstances, the registered buyer becomes responsible for paying GST under RCM.

Example of RCM on metal scrap

Suppose ABC Engineering Works purchases iron scrap from an individual scrap collector who does not have GST registration.

The transaction details are:

  • Purchase value: ₹3,00,000.
  • Supplier registration status: Unregistered.
  • Buyer registration status: Registered.
  • Assumed applicable GST rate: 18%.

Since the transaction falls under the notified RCM provisions, the buyer is responsible for paying GST.

Calculation:

₹3,00,000 × 18% = ₹54,000.

ParticularsAmount
Value of metal scrap₹3,00,000
Applicable GST rate18%
RCM liability₹54,000
GST paid by buyer₹54,000

The buyer must discharge the RCM liability in the prescribed manner.

Subject to the applicable input tax credit conditions, the buyer may subsequently claim eligible ITC.

Important: The 18% rate is an illustrative assumption, not a universal GST rate for every metal scrap category. The correct rate must be checked against the applicable HSN classification and GST rate notification.

5. Difference Between GST TDS and RCM on Metal Scrap

Many businesses misunderstand the relationship between GST TDS and RCM.

Both provisions were introduced as part of the broader metal scrap compliance framework, but their applicability is different.

The following table explains the distinction.

ParticularsGST TDSGST RCM
Relevant provisionSection 51Section 9(3)
SupplierRegisteredUnregistered
BuyerRegisteredRegistered
PurposeDeduction and deposit of tax at sourcePayment of GST by recipient
Rate2%Applicable GST rate
ThresholdContract value exceeding ₹2.5 lakhNo corresponding ₹2.5 lakh threshold in the notified entry
Responsible personRegistered buyerRegistered buyer
Relevant returnGSTR-7GSTR-3B
ITC treatmentSupplier receives TDS creditBuyer may claim eligible ITC

Can TDS and RCM apply to the same purchase?

Under the specific metal scrap provisions, the supplier’s registration status determines the relevant mechanism.

  • Registered supplier to registered buyer: GST TDS provisions may apply.
  • Unregistered supplier to registered buyer: RCM provisions apply.

A buyer should not deduct 2% GST TDS on an unregistered supplier’s RCM purchase merely because the goods are metal scrap.

Likewise, the buyer should not pay RCM simply because the transaction involves scrap.

The registration status of the supplier must be verified.

6. Is the ₹2.5 Lakh Threshold Applicable to GST TDS on Metal Scrap?

Yes, the applicable GST TDS threshold is an important compliance consideration.

Under Section 51 of the CGST Act, GST TDS applies where the value of taxable supply under a contract exceeds ₹2,50,000, excluding the GST amount.

The threshold relates to the value of the taxable supply under a contract.

It should not automatically be interpreted as a separate ₹2.5 lakh exemption for every invoice when multiple invoices arise from the same contract.

Example 1: Contract below ₹2.5 lakh

Suppose a registered manufacturer purchases metal scrap worth ₹2,00,000 under a contract.

Since the taxable contract value does not exceed ₹2,50,000, GST TDS under this threshold provision is not required.

Example 2: Contract above ₹2.5 lakh

Suppose a registered buyer purchases scrap worth ₹4,00,000 under a single contract.

GST TDS will apply if the remaining statutory conditions are satisfied.

Calculation:

₹4,00,000 × 2% = ₹8,000.

Example 3: Multiple invoices under one contract

Suppose a buyer enters into a contract for metal scrap worth ₹8,00,000.

The supplier issues four invoices of ₹2,00,000 each.

The total taxable value under the contract is ₹8,00,000.

The buyer should evaluate the TDS requirement based on the contract value rather than treating each invoice as an independent contract merely because the invoices are individually below ₹2.5 lakh.

Important point for MSMEs

Businesses should maintain purchase contracts, purchase orders, invoices and supplier registration records.

This documentation helps establish the correct taxable contract value and supports the buyer’s TDS treatment.

7. Is GST Registration Mandatory for Metal Scrap Dealers?

Registration requirements are another important aspect of the new metal scrap provisions.

Notification No. 24/2024 – Central Tax amended the earlier registration exemption applicable to certain persons making only supplies on which tax is payable under RCM.

The amendment removed the benefit of that exemption for persons engaged in supplying metal scrap covered under Chapters 72 to 81.

This change is significant for small scrap dealers who previously relied on the general exemption available to certain suppliers whose entire supplies were covered by RCM.

What does this mean for unregistered scrap suppliers?

An unregistered person supplying metal scrap to a registered buyer may fall under the RCM framework.

However, the unregistered supplier is still required to evaluate the normal GST registration provisions under Section 22 and other applicable provisions.

The important distinction is:

  • RCM does not automatically make every unregistered supplier exempt from GST registration.
  • The normal registration threshold and applicable registration provisions must be examined.
  • Persons engaged in metal scrap supplies cannot automatically claim the specific exemption under Notification No. 5/2017 after the amendment introduced by Notification No. 24/2024.

Why is this important for small businesses?

Small scrap dealers often operate with limited accounting infrastructure.

They may purchase scrap from individuals, collect materials from factories and sell the material to large manufacturers.

The new provisions make supplier registration status and purchase documentation especially important.

Every business should review its GST registration position instead of assuming that a small turnover automatically resolves every registration question.

8. How to Obtain GST Registration for Metal Scrap TDS?

A registered metal scrap buyer required to deduct GST TDS must ensure that the appropriate GST registration and tax-deductor compliance are in place.

The GST portal provides the relevant registration process through Form GST REG-07.

The GST portal issued an advisory on 22 October 2024 explaining the registration process for metal scrap dealers.

Basic registration process

Step 1: Visit the GST portal

Open the official GST portal at www.gst.gov.in.

Step 2: Open the registration section

Navigate to Services, then Registration, and select the applicable registration application.

Step 3: Select the appropriate registration category

Complete the relevant details in Form GST REG-07.

Step 4: Select the business constitution details

As explained in the GST portal advisory, applicants in this category must select the relevant option under the business constitution section and enter the prescribed description, including “Metal Scrap Dealers” where applicable.

Step 5: Enter business details

Provide the required information, including:

  • Legal name of business.
  • PAN details.
  • Business address.
  • Contact details.
  • Responsible person’s information.
  • Other details required by the portal.

Step 6: Submit the application

Verify the information and submit the form using the prescribed authentication process.

Step 7: Monitor the application

Track the application status and complete any additional requirements communicated through the GST portal.

Businesses should check the latest portal instructions before submitting an application.

9. How to Calculate 2% GST TDS on Metal Scrap?

The calculation of GST TDS is straightforward once the taxable value and applicable transaction type are identified.

The basic formula is:

GST TDS = Taxable value of supply × 2%

GST is excluded from the value on which TDS is calculated.

Example: Intra-state purchase

A registered buyer purchases metal scrap from a registered supplier in the same state.

Taxable value: ₹10,00,000.

Assumed GST rate: 18%.

GST: ₹1,80,000.

Total invoice value: ₹11,80,000.

GST TDS:

₹10,00,000 × 2% = ₹20,000.

Breakdown:

  • CGST TDS: ₹10,000.
  • SGST TDS: ₹10,000.

Example: Inter-state purchase

A registered buyer purchases metal scrap from a registered supplier in another state.

Taxable value: ₹10,00,000.

GST TDS:

₹10,00,000 × 2% = ₹20,000.

In this case, the deduction is under IGST at 2%, subject to the place-of-supply rules and the applicable provisions.

Does GST TDS apply to the GST component?

No. GST TDS is calculated on the taxable value of the supply and not on the GST charged separately on the invoice.

For example:

If the taxable value is ₹5,00,000 and GST is ₹90,000, the TDS calculation is:

₹5,00,000 × 2% = ₹10,000.

It is not calculated on ₹5,90,000.

10. What Is the GSTR-7 Filing Requirement?

GSTR-7 is the GST return used by persons required to deduct tax at source under Section 51.

Registered metal scrap buyers covered by the new TDS provisions must comply with the applicable GSTR-7 filing requirements.

The return contains information about:

  • GSTIN of the supplier.
  • Details of taxable supplies.
  • Amount on which TDS is deducted.
  • Tax deducted under the relevant tax heads.
  • Other prescribed transaction information.

GSTR-7 due date

GSTR-7 is generally required to be filed by the 10th day of the month following the month in which the deduction is made.

For example:

If GST TDS is deducted during January, the applicable GSTR-7 return is generally due by 10 February.

Businesses should verify the latest statutory due date, extensions and portal advisories before filing.

Why is GSTR-7 important?

The return helps the Government track deductions and allows the supplier to receive the corresponding tax credit.

Incorrect supplier GSTINs, incorrect taxable values or wrong tax-head reporting can create reconciliation issues.

Therefore, businesses should verify the return carefully before submission.

11. What Is Form GSTR-7A?

GSTR-7A is the TDS certificate generated electronically based on the information furnished in the GSTR-7 return.

The certificate provides evidence of the amount deducted from the supplier’s payment and deposited through the GST system.

It is important for both parties.

For the buyer

The buyer should ensure that the deduction has been correctly reported and that the relevant certificate becomes available.

For the supplier

The supplier should check the certificate and reconcile the TDS credit with the corresponding purchase and payment records.

If any discrepancy is identified, the supplier should communicate with the deductor for correction.

12. How Can a Supplier Claim GST TDS Credit?

GST TDS is not an additional tax liability imposed on the supplier.

It is a deduction from the supplier’s payment, and the corresponding amount is deposited with the Government.

The supplier can claim the eligible credit after the amount is correctly reported and reflected in the GST system.

The TDS amount is credited to the supplier’s electronic cash ledger in accordance with the applicable GST provisions.

Example

Suppose a registered metal scrap supplier sells scrap worth ₹8,00,000.

The buyer deducts 2% GST TDS.

TDS amount:

₹8,00,000 × 2% = ₹16,000.

The supplier should verify that the ₹16,000 credit is properly reflected in the electronic cash ledger.

The supplier can then use the balance in accordance with the permitted rules governing the electronic cash ledger.

Important reconciliation points

The supplier should check:

  • Whether the buyer has reported the correct GSTIN.
  • Whether the taxable value is accurate.
  • Whether the deducted amount is correct.
  • Whether the correct tax head has been selected.
  • Whether the credit is reflected in the electronic cash ledger.

Failure to reconcile TDS credit can create unnecessary working-capital pressure.

13. Can a Buyer Claim Input Tax Credit on GST Paid Under RCM?

Yes, a registered buyer may claim eligible input tax credit on GST paid under RCM, provided all applicable conditions under Section 16 and other relevant provisions are satisfied.

However, the buyer must understand the difference between GST TDS credit and RCM input tax credit.

These are two different tax treatments.

ITC on RCM purchases

Suppose a registered manufacturing company purchases metal scrap from an unregistered supplier.

Purchase value: ₹5,00,000.

Assumed GST rate: 18%.

RCM liability: ₹90,000.

The buyer pays ₹90,000 under RCM.

If the scrap is used or intended to be used in the course or furtherance of business, and the statutory ITC conditions are satisfied, the buyer may claim eligible ITC.

Important ITC conditions

The buyer should ensure:

  1. The purchase is for business purposes.
  2. The goods are received.
  3. The RCM tax has actually been paid.
  4. The buyer maintains the required supporting documents.
  5. The credit is not blocked under Section 17(5).
  6. The applicable time limits and other ITC conditions are satisfied.

Can ITC be used to pay RCM liability?

No. RCM liability must be discharged through the electronic cash ledger.

Eligible ITC may be claimed after payment and used for permitted output tax liabilities in accordance with GST rules.

This distinction is extremely important for MSMEs managing their monthly cash flow.

14. What Documents Should Metal Scrap Buyers Maintain?

Proper documentation is essential for GST compliance.

Metal scrap transactions can involve multiple suppliers, different types of scrap, varying quantities and fluctuating purchase prices.

A buyer should maintain an organised documentation system.

Important documents include:

  • Purchase orders.
  • Purchase contracts.
  • Supplier GST registration details.
  • Supplier PAN information, where applicable.
  • Tax invoices issued by registered suppliers.
  • Self-invoices and payment vouchers where required under RCM provisions.
  • Delivery challans.
  • Goods receipt notes.
  • Weighbridge slips.
  • Material inspection reports.
  • E-way bills, where applicable.
  • Payment records.
  • Bank statements.
  • GSTR-7 filing acknowledgements.
  • GSTR-7A certificates.
  • RCM payment records.
  • ITC reconciliation statements.

Why are weighbridge slips important?

In the scrap industry, the quantity of goods received may differ from the quantity initially declared by the supplier.

For example, a supplier may declare 10,000 kilograms of iron scrap, but the buyer may record 9,850 kilograms after weighing.

The buyer should maintain appropriate records to explain the difference.

Such records help establish the actual quantity received and support the purchase valuation.

15. What Are the Consequences of Non-Compliance?

Failure to follow GST TDS and RCM provisions can create compliance and financial risks.

The consequences depend on the nature of the default and the applicable provisions of the CGST Act and rules.

Common compliance mistakes

1. Failure to deduct GST TDS

A registered buyer may fail to deduct the prescribed amount despite being covered by Section 51 and the relevant notification.

This may attract consequences under the applicable GST provisions.

2. Incorrect RCM treatment

A buyer may incorrectly treat a purchase from an unregistered supplier as a normal forward-charge transaction.

This can result in unpaid GST liability.

3. Incorrect HSN classification

Incorrect classification can lead to the wrong tax treatment and incorrect reporting.

4. Late GSTR-7 filing

Delayed filing can result in applicable late fees and other statutory consequences.

5. Incorrect supplier GSTIN

Incorrect GSTIN reporting may prevent the supplier from receiving the correct TDS credit.

6. Ineligible ITC claims

Claiming ITC without satisfying the prescribed conditions can result in reversal, interest and other consequences.

How can businesses reduce these risks?

Businesses should establish a systematic compliance process involving:

  • Supplier verification before purchases.
  • Correct HSN classification.
  • Purchase contract review.
  • Automated TDS calculations.
  • Monthly GSTR-7 reconciliation.
  • Timely RCM payment.
  • ITC verification.
  • Proper accounting records.

A well-maintained compliance system can help reduce errors and improve financial transparency.

16. Practical Impact of the New GST Rules on MSMEs

The new GST provisions have a significant impact on MSMEs involved in metal scrap trading, manufacturing and recycling.

Small businesses often operate with limited financial and administrative resources.

The additional compliance requirements may therefore require changes to their existing accounting and procurement systems.

A. Impact on registered scrap buyers

Registered scrap buyers must identify qualifying purchases from registered suppliers and deduct GST TDS where required.

They must also ensure that their GST registration and return filing arrangements support the new obligations.

B. Impact on manufacturing businesses

Manufacturers purchasing scrap as raw material must evaluate whether each purchase falls under forward charge, TDS or RCM.

The procurement department and accounts department should coordinate to ensure that the correct treatment is applied.

C. Impact on small scrap dealers

Small scrap dealers must review their registration requirements and understand the documentation expected by registered buyers.

They should maintain appropriate purchase and sale records.

D. Impact on working capital

TDS deductions can affect the immediate cash received by registered suppliers.

Although eligible TDS credit becomes available through the GST system, businesses should account for the timing difference when planning working capital.

Similarly, RCM requires buyers to arrange cash payment of GST before claiming eligible ITC.

E. Impact on accounting systems

Businesses may need to update their accounting software to separately identify:

  • Registered supplier purchases.
  • Unregistered supplier purchases.
  • GST TDS deductions.
  • RCM liabilities.
  • TDS credit.
  • Eligible ITC.
  • Monthly GST reconciliation.

17. Difference Between GST TDS and Income Tax TDS Under Section 194Q

Another common source of confusion is the difference between GST TDS under Section 51 and income tax TDS under Section 194Q.

Both provisions use the term TDS, but they operate under different laws.

ParticularsGST TDSIncome Tax TDS
Applicable lawCGST Act, 2017Income-tax Act
SectionSection 51Section 194Q
General rate relevant here2%0.1%
NatureGST deductionIncome tax deduction
ThresholdTaxable contract value exceeding ₹2.5 lakh for applicable suppliesPurchases exceeding ₹50 lakh from a seller
Buyer turnover conditionDepends on the applicable GST TDS notificationGenerally exceeds ₹10 crore in preceding financial year
ReturnGSTR-7Applicable income tax TDS return

Does Section 194Q also apply to metal scrap?

It may apply independently if the conditions under Section 194Q of the Income-tax Act are satisfied.

For example, the buyer must meet the prescribed turnover condition, and purchases from the relevant resident seller must exceed the statutory threshold.

For FY 2025-26 and the current framework described by the Income Tax Department, Section 194Q generally provides for 0.1% TDS on the amount exceeding ₹50 lakh, subject to its conditions.

Therefore, a metal scrap buyer should separately evaluate GST TDS and income tax TDS applicability.

The existence of GST TDS does not automatically eliminate an independent income tax TDS obligation.

18. Real-Life Examples of GST on Metal Scrap

To understand the practical operation of these provisions, consider the following examples.

Case 1: Registered buyer purchases iron scrap from a registered dealer

A manufacturing company purchases iron scrap worth ₹12,00,000 from a registered scrap dealer.

Assumed GST rate: 18%.

Both parties are GST registered.

The transaction falls within the specified metal scrap category.

The buyer should evaluate and deduct GST TDS at 2%, assuming the applicable threshold and other statutory conditions are satisfied.

TDS:

₹12,00,000 × 2% = ₹24,000.

The buyer must comply with the applicable GSTR-7 requirements.

Case 2: Registered buyer purchases copper scrap from an unregistered individual

A registered electrical manufacturing business purchases copper scrap worth ₹4,00,000 from an unregistered individual.

Assumed GST rate: 18%.

The transaction falls under the notified RCM category.

RCM liability:

₹4,00,000 × 18% = ₹72,000.

The buyer is responsible for paying ₹72,000 under RCM.

The buyer should not deduct the 2% GST TDS merely because the goods are copper scrap.

Case 3: Small registered buyer purchases scrap worth ₹2 lakh

A registered manufacturer purchases metal scrap worth ₹2,00,000 under a contract from another registered person.

Since the taxable contract value does not exceed ₹2,50,000, the GST TDS threshold is not crossed.

The buyer should still examine the normal GST treatment of the supply.

Case 4: Multiple purchases from the same registered supplier

A manufacturing company enters into a single supply contract for metal scrap worth ₹10,00,000.

The supplier issues multiple invoices throughout the month.

The buyer should examine the taxable contract value and applicable threshold rather than treating every invoice as an independent transaction without examining the underlying contract.

Case 5: Buyer purchases scrap from an unregistered supplier who is below the normal registration threshold

A registered factory purchases metal scrap from an individual scrap collector who has not obtained GST registration.

Even if the supplier’s turnover is below the normal registration threshold, the registered recipient may still be required to pay GST under RCM.

The supplier’s turnover does not remove the recipient’s liability under the notified entry.

This is one of the most important implications of the new framework.

19. Frequently Asked Questions (FAQs)

Q1. What is the GST rate of TDS on metal scrap?

The GST TDS rate is 2% for qualifying registered-to-registered metal scrap transactions covered by the relevant notification.

Q2. From which date did the new metal scrap GST rules become applicable?

The relevant provisions became effective from 10 October 2024.

Q3. Is GST TDS applicable to all metal scrap purchases?

No. The special 2% TDS provision applies to qualifying supplies of specified metal scrap from registered suppliers to registered buyers, subject to the statutory conditions.

Q4. Is RCM applicable when purchasing metal scrap from an unregistered person?

Yes. A registered recipient is required to pay GST under RCM on qualifying metal scrap supplies received from an unregistered supplier.

Q5. Does the ₹2.5 lakh threshold apply to RCM?

The ₹2.5 lakh threshold under Section 51 is relevant to GST TDS. It is not a general threshold exemption under the notified metal scrap RCM entry.

Q6. Is GST TDS calculated on the invoice’s total value?

No. GST TDS is calculated on the taxable value, excluding the GST component.

Q7. Can a buyer claim ITC on RCM paid for metal scrap?

Yes, subject to the applicable provisions of Section 16, Section 17 and other GST conditions.

Q8. Can RCM liability be paid using existing ITC?

No. RCM liability must be discharged through the electronic cash ledger.

Q9. Which return is used for GST TDS reporting?

The buyer generally reports the applicable GST TDS deductions through Form GSTR-7.

Q10. What is Form GSTR-7A?

It is the electronic certificate of tax deducted at source generated based on the GSTR-7 information.

Q11. Is GST registration mandatory for all scrap dealers?

Registration must be evaluated under the normal GST registration provisions. The specific exemption under Notification No. 5/2017 is no longer available to persons engaged in supplying the specified metal scrap covered by the amendment.

Q12. Does GST TDS apply to purchases from unregistered dealers?

No. The specified 2% GST TDS provision concerns registered-to-registered transactions. Qualifying purchases from unregistered suppliers are covered by RCM instead.

Q13. Does the 2% GST TDS mean the buyer pays an additional 2% GST?

No. It is deducted from the supplier’s payment and deposited with the Government. It is not an additional GST rate charged on the goods.

Q14. Does the 2% GST TDS replace income tax TDS under Section 194Q?

No. Section 194Q is a separate income tax provision. Its applicability must be evaluated independently.

Q15. What happens if the buyer forgets to deduct GST TDS?

The buyer may face the consequences prescribed under the CGST Act, including applicable interest and other statutory consequences depending on the nature of the default.

Q16. Are all goods under Chapters 72 to 81 automatically scrap?

No. Correct product classification and the actual nature of the goods must be examined. The provisions concern metal scrap and should not be extended indiscriminately to every metal product.

Q17. What happens if the supplier has GST registration but is not regularly filing returns?

The buyer should verify the supplier’s GST registration and invoice details. Registration status, tax reporting and ITC eligibility are separate compliance considerations.

Q18. Is a separate GST registration required for deducting TDS?

The buyer must ensure that the appropriate registration as a GST tax deductor is obtained through the prescribed process, where required. Form REG-07 and the relevant portal instructions should be followed.

20. Compliance Checklist for MSME Metal Scrap Buyers

To avoid GST-related errors, businesses should follow a monthly compliance checklist.

Before purchasing scrap:

  • Verify the supplier’s GST registration status.
  • Check the metal scrap HSN classification.
  • Determine whether the transaction is covered by TDS or RCM.
  • Review the purchase contract.
  • Check the applicable taxable value and TDS threshold.
  • Maintain supplier and purchase documentation.

During purchase accounting:

  • Record the correct taxable value.
  • Identify GST separately from the purchase value.
  • Calculate GST TDS where applicable.
  • Record RCM liability for qualifying unregistered supplier purchases.
  • Maintain goods receipt and weighing records.

During monthly GST compliance:

  • Deposit GST TDS within the applicable time.
  • File GSTR-7 within the prescribed due date.
  • Reconcile TDS credit with supplier records.
  • Pay RCM liability through the electronic cash ledger.
  • Report RCM correctly in GSTR-3B.
  • Claim eligible ITC after satisfying the statutory conditions.

During annual reconciliation:

  • Match purchase records with GST returns.
  • Review RCM payments.
  • Check TDS certificates.
  • Reconcile electronic cash ledger credits.
  • Verify ITC eligibility.
  • Resolve pending discrepancies.

21. How CleverCoins Can Help Your Business with GST Compliance

GST compliance in the metal scrap industry involves more than simply calculating tax.

Businesses must understand supplier registration status, HSN classification, GST TDS, RCM, registration requirements, return filing and input tax credit eligibility.

For MSMEs, managing all these requirements internally can be challenging, particularly when purchase volumes are high and suppliers have different registration statuses.

This is where professional tax and compliance support becomes valuable.

CleverCoins provides tax consultancy and business compliance services designed to help businesses manage their financial and statutory responsibilities.

Whether you operate a manufacturing company, a metal scrap trading business, a small enterprise or a growing MSME, professional assistance can help you understand your GST obligations and establish an organised compliance process.

CleverCoins can assist businesses with:

  • GST registration and compliance guidance.
  • GST return filing.
  • GST TDS compliance.
  • RCM applicability and calculation guidance.
  • GST reconciliation.
  • Input tax credit review.
  • Income tax and TDS compliance.
  • Business taxation and financial consultancy.

Instead of waiting for a GST notice or discovering an error during reconciliation, businesses should establish a proactive compliance system.

Visit https://clevercoins.org/ to explore the available services and consultation options.

22. Conclusion: Understand the 2% TDS and RCM Rules Before Your Next Scrap Purchase

The introduction of the 2% GST TDS and RCM provisions has brought important changes to India’s metal scrap industry.

For registered buyers purchasing specified metal scrap from registered suppliers, the applicable GST TDS provisions must be followed when the statutory conditions are satisfied.

For registered buyers purchasing specified metal scrap from unregistered suppliers, GST liability shifts to the recipient under Reverse Charge Mechanism.

The two provisions are different and must be applied according to the registration status of the supplier and the nature of the transaction.

For MSMEs, the most important steps are to:

  1. Verify the supplier’s GST registration status.
  2. Identify the correct HSN classification.
  3. Determine whether TDS or RCM applies.
  4. Maintain proper purchase documentation.
  5. File the applicable GST returns.
  6. Pay tax within the prescribed time.
  7. Reconcile GST TDS and RCM records regularly.
  8. Claim eligible ITC only after meeting the statutory conditions.

A proactive approach to GST compliance can help businesses avoid unnecessary disputes, improve financial management and build a stronger foundation for growth.

Need assistance with GST registration, GST TDS, RCM or GST return filing? Connect with CleverCoins and get professional guidance for your business.

Visit: https://clevercoins.org/


Disclaimer: This article is intended for general educational and informational purposes. GST provisions, notifications, rates, procedural requirements and return-filing rules may change. The actual tax treatment depends on the product classification, transaction structure, registration status and applicable law. Readers should verify the latest CBIC notifications and consult a qualified GST professional before making tax or compliance decisions.

Official references:

  • Notification No. 24/2024 – Central Tax.
  • Notification No. 25/2024 – Central Tax.
  • Notification No. 06/2024 – Central Tax (Rate).
  • Section 9(3), Section 16, Section 22 and Section 51 of the CGST Act, 2017.
  • GST portal advisory on GST REG-07 dated 22 October 2024.
  • Income-tax Act provisions relating to Section 194Q.

Leave a Comment

Your email address will not be published. Required fields are marked *

About Us

Smart, reliable tax consultancy delivering tailored financial solutions to help individuals and businesses maximize savings and stay compliant.

Recent Posts

  • All Post
  • Accounting & Bookkeeping
  • APEDA Registration
  • Banking & Finance
  • Business Analytics & Data
  • Business Case Study
  • Business Licensing
  • Business Registration
  • Business Strategy
  • Company Incorporation & Legal
  • Company Registration
  • Compliance
  • Copy Right Registration
  • Corporate Law
  • Customer Service & CX
  • Digital Marketing & SEO
  • E-commerce & D2C
  • Finance
  • FSSAI
  • Funding & Investment
  • Goverment Scheme
  • Government Schemes
  • GST
  • GST & Indirect Tax
  • Human Resources & Payroll
  • Import Export Code
  • Income Tax
  • Income Tax Act 2026
  • International Business & Export
  • International Finance
  • ISO Certification
  • Leadership & Management
  • Legal Entity Identifier (LEI) Code
  • Marketing
  • NGO
  • Operation & Supply Chain
  • Operations & Supply Chain
  • Patent registration
  • Payroll
  • Personal Finance
  • Private Limited Company
  • Provident Fund
  • Registration
  • RERA
  • RERA Agent Registration
  • Risk & Compliance
  • Sales & Business Development
  • Shop & Establishment Registration
  • Spice Board Registration
  • Start Up
  • Startup & Entrepreneurship
  • Startup & MSME
  • Stock Market
  • Taxation
  • Trademark
  • Trademark & IP
  • Trademark Registration

© 2026 Copyrights with Clevercoins.org